Brass for Fuel Dispensing.
Retail fuel dispensers run for years exposed to UV, weather, and the corrosive chemistry of modern fuel blends. Brasstech machines the brass internals that keep nozzles, swivels, breakaways, and meter bodies sealing — accurately, reliably, year after year.
What the fuel dispensing industry asks of brass.
Sealing across cycles
A nozzle clicks shut a thousand times a day. Seal seats have to be perfect on cycle one and on cycle ten million.
Fuel-blend chemistry
E10, E25, biodiesel — newer blends are more aggressive than straight petrol on brass and on elastomers.
Field traceability
When a dispenser fails in the field, the safety investigation traces parts to lots to heats. We supply parts that survive that investigation.
What we bring to fuel dispensing programs.
A short list of controls, alloys, and process disciplines that make us a sensible default supplier for this sector.
- Lapped seal seats, Ra ≤ 0.4 µm capability
- DZR alloys for high-ethanol and biodiesel programs
- Lot-level traceability, heat to dispatch
- 100% pressure / leak test on critical parts
- Long-running OEM relationships in the sector
Typical components
- Nozzle internals and seats
- Hose swivels
- Hose breakaways
- Meter bodies and chambers
- Vapour-recovery components
- Pump-strainer housings
Related product families
Send your fuel dispensing brass drawing.
Share part details, drawing (PDF / STEP / DWG), and annual volume. Our sales engineers acknowledge every RFQ within one business day.
Buyer FAQs
- Are your parts compatible with ethanol-blend fuels?
- Yes. We supply parts validated for petrol, diesel, E10 / E25 ethanol blends, and biodiesel. DZR alloys recommended for high-ethanol or long-life programs.
